QuinLED Dig2go

The QuinLED-dig2go is an easy to use small form factor addressable LED controller. It’s an easy entry point to digitally controllable LEDs or great and a quick go-to controller for experienced people! It’s mainly oriented towards smaller setups. Being an entry level controller for RGB-IC/Addressable LEDs it’s fully plug and play, no screws or anything like that! Just plug-in USB-C power (like your phone uses) and a set of Addressable LEDs and it’s up and running! The dig2go is compatible with addressable 5v RGB (like ws2812b) or addressable 5v RGBW (like sk6812) strips or pixels!

The dig2go is very versatile and can be used for a range of applications such as people just starting out with addressable LEDs wanting to add some to their game room or bedroom to people wanting an easy to use mobile solution that can be operated from a simple USB power bank and anything in between really!

For this the dig2go has an extensive feature set that’s all included in every one of them! This includes a fully level-shifted output, up to 15w power handling, easy powering using USB-C but also advanced features such as a built-in IR receiver and even a high quality MEMS Digital Microphone!

Because it’s fully designed around USB-C it’s also great combined with a USB powerbank for portable applications!

Although the dig2go is a very small controller it does pack a lot of advanced hardware making it best in class to drive addressable LEDs from such a small form factor!

• Very small form factor in fully custom plastic molded case
  • Not a re-used generic part, fully custom to make it as best for it’s purpose as it can be!
• ESP32 with 4MB of flash memory
• Fully level-shifted 5v LED data output
• Switchable power output to LEDs
  • Custom “relay” circuit which cuts off power to the LEDs completely when turned off in WLED!
  • Great for battery powered operation using a USB powerbank
• Built-in digital microphone for sound reactive effects
  • High quality original ICS-43434 digital MEMS microphone
• On/Off button integrated into case
• IR receiver for generic IR remotes
• Expandable hardware platform with 2x 4 female headers
  • Switched 5v, 3v3, 2x GND available
  • 4x GPIO (Extra buttons, sensors, I2C connections, etc.)

Extended functionality list

• Built-in separate protection circuits and auto-reset fuses for LED power and onboard electronics
• Proper USB and USB-C implementation
  • Works with USB-A to USB-C cables or USB-C to USB-C cables, correctly activating USB-C 5v 3Amp mode
  • Also still works great with a USB-A to USB-C cable!
• USB-C ESD protection
• Full USB-C input including USB-to-Serial and auto program circuit
  • Uses CH340 USB-to-Serial chip
  • “Open” hardware, nothing locked down, run any firmware you want!

About QUINLED

Quinled makes several PCB boards with extensive guides for both dimming Analog LEDs and controlling addressable digital LEDs! All of these are available as DIY boards with extensive guides and some also are available pre-assembled!